Aller au contenu

Publications

Journal articles

  1. A Mandal*, A Morali*, M Skorobogatiy, S Bodkhe (2023). 3D printing of Polyvinylidene Fluoride Based Piezoelectric sensors for Non-Invasive Continuous Blood Pressure Monitoring. Applied Engineering Materials. DOI: 1002/adem.202301292.
  2. A Morali*, A Mandal*, M Skorobogatiy, S Bodkhe (2023). Unleashing the piezoelectric potential of PVDF: a study on phase transformation from gamma (γ) to beta (β) phase through thermal contact poling. RSC Advances. DOI: 1039/D3RA05068H.
  3. R Shamsaee Malfajani; H Niknam*; S Bodkhe; D Therriault; J-J Laurin; and M S Sharawi. (2023). A 3D printed encapsulated dual wide-band dielectric resonator antenna with beam switching capability. IEEE Open Journal of Antennas and Propagation; DOI:1109/OJAP.2023.3274167.
  4. R Shamsaee Malfajani; H Niknam*; S Bodkhe; D Therriault; J-J Laurin; and M S Sharawi. (2023). A Dual Wide-Band Mushroom-Shaped Dielectric Resonator Antenna for 5G Sub-6-GHz and mm-Wave Bands. Submitted to IEEE Open Journal of Antennas and Propagation DOI:1109/OJAP.2023.3292390.
  5. S Kuthe*, A Schlothauer, S Bodkhe, C Hulme-Smith, P Ermanni, 3D printed mechanically representative aortic model made of gelatin fiber reinforced silicone composite; Materials letters 2022 (4); DOI: 1016/j.matlet.2022.132396.
  6. H Niknam*, A H Akbarzadeh, D Therriault, S Bodkhe, Tunable thermally bistable multi-material structures; Applied materials Today; DOI:1016/j.apmt.2022.101529.
  7. O Testoni*, S Bodkhe, A Bergamini, P Ermanni, Network of selectively compliant actuators based on shape memory alloys and polymers for a reconfigurable sandwich panel; Journal of Intelligent Material Systems and Structures. DOI:1177/1045389X221109260.
  8. O Testoni, T Lumpe, J-L Huang, M Wagner, S Bodkhe, Z Zhakypov, R Spolenak, JPaik, P Ermanni, L Muñoz, K Shea, A 4D printed active compliant hinge for space using shape memory alloys and polymers; Smart materials and structures 2021; 30(8). DOI: 1088/1361-665X/ac01fa
  9. O Testoni*, S Christen, A Bergamini, S Bodkhe, P Ermanni, A novel concept of modular shape-adaptable sandwich panel with distributed actuation based on shape memory alloys; Journal of Intelligent Material Systems and Structures DOI: 10.1177/1045389X211057203
  10. O Testoni*, A Bergamini, S Bodkhe, P Ermanni, A novel concept for adaptive friction damper based on electrostatic adhesion; Smart Materials and Structures 2020; 29(10), p. 105032; DOI: 1088/1361-665X/ab9f1b
  11. S Bodkhe, P Ermanni, 3D Printing of Multifunctional Materials for Sensing and Actuation: Merging Piezoelectricity with Shape memory; European Polymer Journal 2020; 132(2020), p. 109738; DOI: 1016/j.eurpolymj.2020.109738.
  12. S Bodkhe, V Lorenzo*, S Zhu*, O Testoni*, N Aegerter, P Ermanni, 3D Printing to Integrate Actuators into Composites ; Additive Manufacturing 2020; 35(2020), p. 101290; DOI: 1016/j.addma.2020.101290.
  13. S Bodkhe, P Ermanni, Challenges in 3D printing of piezoelectric materials; Multifunctional Materials; 2019; p. (26); DOI: 1088/2399-7532/ab0c41.
  14. O Testoni*, A Bergamini, S Bodkhe, P Ermanni, Smart material based mechanical switch concepts for the variation of connectivity in the core of shape-adaptable sandwich panels; Smart Materials and Structures; 2019; 28, p. 025036. DOI: 1088/1361-665X/aafa40.
  15. S Bodkhe, C Noonan, F P Gosselin, D Therriault; Coextrusion of multifunctional sensors; Advanced Engineering Materials 2018; 20(10), p. 1800206. DOI: 1002/adem.201800206. (Back cover)
  16. S Bodkhe, P S M Rajesh, F P Gosselin, D Therriault; Simultaneous 3D printing and poling of PVDF and its nanocomposites; Applied Energy Materials; 2018; 1(6), p. 2474-2482. DOI: 1021/acsaem.7b00337.
  17. S Bodkhe, G Turcot, F P Gosselin, D Therriault; One-step solvent evaporation-assisted 3D printing of piezoelectric PVDF nanocomposite structures; Applied Materials and Interfaces; 2017; 9(24), p. 20833-20842. DOI: 1021/acsami.7b04095.
  18. T J. Wallin, J H. Pikul J, S Bodkhe, J S Odent, W Pan, D Therriault, B W Mcenerney, R P Dillon, E P Giannelis, R F Shepherd; Click chemistry stereolithography for soft robots that self-heal; Journal of Materials Chemistry B; 2017; 5; p. 6249-6255. DOI: 1039/c7tb01605k.
  19. S Bodkhe, P S M Rajesh, S Kamle, V Verma; Beta-phase enhancement in polyvinylidene fluoride through filler addition: comparing cellulose with carbon nanotubes and clay; Journal of Polymer Research; 2014; 21(5); p. 434 (11). DOI: 1007/s1096.
  20. S Bodkhe, P S M Rajesh, S Kamle, V Verma; Enhancing beta-phase in PVDF through physicochemical modification of cellulose; Electronics Materials Letters; 2014; 10(1); p. 315-319. DOI: 1007/s13391-013-3083-5.

Patent

  1. Bodkhe, R. Tao, F. P. Gosselin, D. Therriault 2016. Piezoelectric composite, ink and ink cartridge for 3D printing, bifunctional material comprising the piezoelectric composite, manufacture and uses thereof; U.S. Patent # US11466169B2, 2022.

Book chapter

R D Farahani, D Therriault, M Dube, S Bodkhe, M Mahdavi; Additive manufacturing of multifunctional nanocomposites and composites; Comprehensive Composite Materials II, Volume 6: Nanocomposites and Multifunctional Materials, Elsevier, Book chapter edited by: Ton Peijs, and Erik T Thostenson, 2018. p 380-407. DOI: 10.1016/B978-0-12-803581-8.10019-0

                               International conference proceedings and presentations

  1. Morali A*; Skorobogatiy M; Bodkhe S. (2023). Embedding in-house fully printed piezoelectric sensors for structural health monitoring (2023). 13th Canada-Japan Workshop on Composites, Quebec City, Canada.
  2. Damansabz R*; Bodkhe S. (2023). Evaluating the interfacial bonding strength of additively manufactured shape memory alloy hybrid composites (2023). 13th Canada-Japan Workshop on Composites, Quebec City, Canada.
  3. Bodkhe S (2023). Multi-material 4D printing of smart composite structures. 31st International Materials Research Congress (IMRC2023), Cancun, Mexico.
  4. Morali A*; Mandal A*; Skorobogatiy M; Bodkhe S. (2023). Structural health monitoring using embedded, fully-printed piezoelectric sensors. 31st International Materials Research Congress (IMRC2023), Cancun, Mexico.
  5. Mandal A*; Morali A*; Leroux L, Skorobogatiy M; Bodkhe S. (2023). 3D printing of smart materials for continuous blood pressure monitoring. 31st International Materials Research Congress (IMRC2023), Cancun, Mexico.
  6. Bodkhe S; Niknam H*; Akbarzadeh A; Therriault D. (2023). Additively manufactured thermally bistable structures. 23rd International Conference on Composite Materials (ICCM23), Belfast, Ireland.
  7. O Testoni*, A Bergamini, S Bodkhe, P Ermanni; Mechanical characterization of a novel concept of adaptive electrostatic friction damper; SMASIS 2020 10th; Irvine, California, USA; September 2020.
  8. S Bodkhe, L Vigo*, P Ermanni; 3D printing to automate shape memory alloy placement in composite; 30th International Conference on Adaptive Structures and Technologies; Montreal, Canada; October 2019, p2.
  9. S Bodkhe, T Frei*, P Ermanni; 4D printing of multifunctional materials; 22nd International Conference on Composite Materials; Melbourne, Australia; August 2019, p8.
  10. O Testoni*, A Bergamini, S Bodkhe, P Ermanni; A novel concept of a modular shape-adaptable sandwich panel able to achieve multiple shapes; 10th ECCOMAS Thematic Conference on Smart Structures and Materials; Paris, France; July 2019.
  11. S Bodkhe, F P Gosselin, D Therriault; 3D printing active piezoelectric sensors in a single step; 8th New Mech; Boston, USA; October, 2017.
  12. S Bodkhe, C Noonan, S O’Rourke, F P Gosselin, D Therriault; Single-step 3D printed piezoelectric sensors for motion and fluid flow sensing; 54th Annual Technical Meeting, Society of Engineering Science, ASME-AMD Joint Conference; Boston, USA; July, 2017.
  13. Bodkhe, C. Noonan, F.P. Gosselin, and D. Therriault. (2017). One-step piezoelectric sensors for smart textiles; 15th Expo Hightex, Montreal, Canada; 2017.
  14. S Bodkhe, F P Gosselin, D Therriault; Three-dimensional printing of polyvinylidene fluoride-barium titanate nanocomposite sensors; 24th International Congress of Theoretical and Applied Mechanics; Montreal, Canada; 2016, p2.
  15. S Bodkhe, D Therriault; Three-dimensional printing of nanocomposites for mechanical microsystems; Some Emerging Technologies for Nanotechnologies; Montreal, Canada; 2015.
  16. S Bodkhe, F P Gosselin, D Therriault; Three-dimensional printing of polyvinylidene fluoride-barium titanate nanocomposite sensors; 20th International Conference on Composite Materials; Copenhagen, Denmark; 2015, p9.
  17. S Bodkhe, F P Gosselin, D Therriault; Three-dimensional structures with polyvinylidene fluoride; ASME 2014 International Mechanical Engineering Congress and Exposition; Montreal, Canada; 2014.
  18. V Verma, P S M Rajesh, S Bodkhe, S Kamle; Bacterial cellulose enhances β-phase in polyvinylidene fluoride; TMS 2014 143rd Annual Meeting and Exhibition; San Diego, USA; 2014, p8.

Invited talks

  1. AM of Adaptive Structures, Canada Virtual Happy Hour organized by Women in 3D Printing Canada, 2023.
  2. EDI Perspectives From Both Ends, Diversity and Inclusion Coffee Break organized by Composites Knowledge Network, 2023.
  3. Additive manufacturing of Adaptive Structures, TIPE 3D Printing | 2023 Conference, 2023.
  4. Multimaterial additive manufacturing of adaptive structures for space applications, SpaceEx: Space Exploration Conference 2022, Concordia University, 2022.
  5. Additive manufacturing of intelligent structures, McGill University, 2022.
  6. Additive manufacturing of adaptive structures, IIT Jodhpur, 2022.
  7. 3D printing of adaptive systems, “JLU-Polytechnique Montreal” Additive Manufacturing Online Forum, 2021.
  8. Additive manufacturing of intelligent structures, McGill University, 2019.